Canon Printer Installation and Setup
The following tutorial will help you execute the Canon printer Installation and setup without any hassle or blocks. Follow the given steps to the end and install and connect your canon printer to the computer.
Canon printer Hardware Installation
and Setup
●
When the printer is free from the packaging material place it
on a flat surface.
●
Now firmly insert the power cord in the port then insert the
other end to the power outlet.
●
Enable the power supply to the printer then open the ink
cartridge cabinet.
●
Open the print head locker lid and place the print head in
the required slots.
●
Close the cabinet and let the Canon printer align the
printheads and other hardware.
Canon printer driver installation and
setup
●
First, turn off your printer.
●
Now insert the Canon driver CD in the optical drive and run
the setup.
●
When the driver installation wizard appears, select the 'Easy
Install' option.
●
Go with the instructions, select the application you want to
configure then click the install button.
Canon Printer USB connection installation
and setup
●
While you install the Canon printer drivers, the connection
type screen will appear.
●
Choose the USB connection mode then connect the printer to
the computer via USB cable.
●
Now switch on the Canon printer.
●
The printer driver will detect the port in use.
●
The driver application will then present you with the
printhead alignment option, click the execute button.
●
Now load some paper in the tray then click the Ok button to
initiate the alignment.
●
After the alignment page is printed, click the Next button.
●
Installation successfully completed message will appear on
the screen, then click the Exit button.
Canon printer wireless connection
Installation and setup
WPS
connection is by far the easiest and the recommended wireless connection type. The
WiFi Protected Setup or WPS, in short, allow permitted device to access your
network without the need of network password.
●
Turn on the Canon printer then press the WiFi button for
about twenty seconds.
●
When LED next to the WiFi button starts flashing then press
the push button on the access point(router).
●
When power and wireless LED stops flashing it's indicative of
the successful wireless connection.
Comments
Post a Comment